Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Open Source 6Kw Charger. Who Whats What Features?

jkostec · 04-01-2011, 11:34 AM

Adam,

Nice work on the PCB. I used to be in the electronics fab industry. If you are going to assemble these for people and the numbers justify it, you may want to consider ordering a stencil and using solder paste. Even hand soldering becomes much easier. I've ordered 100s, so if you wanted help let me know.

Thanks again for the good work,

John K.

04-01-2011, 11:34 AM	#30 (permalink)
jkostec EcoModding Lurker Join Date: Jun 2010 Location: Madison, WI Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Adam, Nice work on the PCB. I used to be in the electronics fab industry. If you are going to assemble these for people and the numbers justify it, you may want to consider ordering a stencil and using solder paste. Even hand soldering becomes much easier. I've ordered 100s, so if you wanted help let me know. Thanks again for the good work, John K.