View Single Post
Old 04-01-2011, 02:38 PM   #153 (permalink)
jackbauer
Master EcoModder
 
jackbauer's Avatar
 
Join Date: Sep 2009
Location: Ireland
Posts: 734
Thanks: 26
Thanked 304 Times in 171 Posts
I tried it today. Gauge stayed stubbornly on full so i hooked up a scope. Its an agilent handheld which seems to have some problems displaying certain pwm waveforms so i don't entirely trust it. I'm not a huge believer in digital scopes in general and lcd based ones in particular but thats another story. That said the waveform didnt seem to change when in cal mode or when at 99% soc. The vr2 pot made no diference to the wave either so i'm guessing a software bug may exist. I'll try and verify that with a normal scope over the weekend.
__________________
Now, Cole, when you shift the gear and that little needle on the ammeter goes into the red and reads 2000 Amps, that's bad.
www.evbmw.com
  Reply With Quote