Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

teraamper · 04-15-2011, 11:57 AM

Hello
Finally managed to start the construction of controller.
But I have a problem at the beginning. I hawe download the FW in the hex file from the adam's internet page. I hawe the ponyprog program and the stk200 programer. I hawe successfully put the program in the atmega8. But rs232 doesant work. I hawe no idea how to program procesors.
I m working on 500A motor controler

Can someone write a manual how to program the processor.

Thanks

04-15-2011, 11:57 AM	#4632 (permalink)
teraamper EcoModding Lurker Join Date: Jan 2010 Location: Slovenija Posts: 16 Thanks: 5 Thanked 2 Times in 2 Posts	Hello Finally managed to start the construction of controller. But I have a problem at the beginning. I hawe download the FW in the hex file from the adam's internet page. I hawe the ponyprog program and the stk200 programer. I hawe successfully put the program in the atmega8. But rs232 doesant work. I hawe no idea how to program procesors. I m working on 500A motor controler Can someone write a manual how to program the processor. Thanks