Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

teraamper · 04-16-2011, 10:53 AM

hello
I don't hawe any option for the changing frequency. I hawe allredy build hex file, and I just flashing in the atmega8 with ponyprog program.

And if I tested some older FW, and the green LED is allveys OFF. No blinking.

What is the difrerence between the FW:
coug-nocrc-16k.hex
coug-unified-16k.hex

04-16-2011, 10:53 AM	#4638 (permalink)
teraamper EcoModding Lurker Join Date: Jan 2010 Location: Slovenija Posts: 16 Thanks: 5 Thanked 2 Times in 2 Posts	hello I don't hawe any option for the changing frequency. I hawe allredy build hex file, and I just flashing in the atmega8 with ponyprog program. And if I tested some older FW, and the green LED is allveys OFF. No blinking. What is the difrerence between the FW: coug-nocrc-16k.hex coug-unified-16k.hex Last edited by teraamper; 04-16-2011 at 11:01 AM..