Quote:
Originally Posted by Devon_Heron
(excluding DC).
|
hmmm... how about if you
- connect those 3 phases together (with a 3' ballast, if needed) to one side of the motor and ground return to the other. Drive all switches simultaneously for 3x current driving DC controller.
- or use two of the phases for a full bridge config so you can move the motor forward/reverse or regen with a PM/sepex motor.
- or use the 3rd phase for field (weakening) on sepex motors.
- or use that third phase as a buck converter for a charger/DC-DC.
- extra phases make great pets too. I'm walking one just now... oh need to scoop, later.
JR