Hi Phantom
Yes I thought about it but I looked at the material at hand and did what I did. The lower fairing being behind the front makes a rough rounded shape. I plan on making a carbon rounded front end with the center being about bumper level. Incorporating the headlights is a challenge I look at a lot of other vehicles with a similar shape to what I am wanting. I am beginning to think that sharp radiused edges at the front of a vehicle are no good for my vw. Downforce is not economy. Try making one on your vehicle with photos and post your results after 1500 miles.
Quote:
Originally Posted by Phantom
Varn have you thought about bringing the air dam forward so it would start just behind the fog lights?
|
__________________
“The further a society drifts from the truth, the more it will hate those that speak it.” George Orwell
“Before a standing army can rule, the people must be disarmed; as they are in almost every kingdom in Europe.
The supreme power in America cannot enforce unjust laws by the sword; because the whole body of the people are armed.”
– Noah Webster, 1787
|