Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

alexander.foti · 06-10-2011, 07:14 AM

Hi all

I am currently trying to run an MPGuino on my motorbike (a 125 v twin) but am struggling to get the calibration correct.

The issue is that its very difficult to fill the tank exactly the same on more than one occasion due to the tank design.

Is there any other way to calibrate the mpguino.

I am strugling to find flow rate information for the injectors in my bike.

I have narrowed down the vss pulses but the injector pulse value is baffling me.

Thanks in advance!

06-10-2011, 07:14 AM	#1 (permalink)
alexander.foti EcoModding Lurker Join Date: Nov 2008 Location: London UK Posts: 95 Thanks: 3 Thanked 7 Times in 4 Posts	Mpgunino calibration help Hi all I am currently trying to run an MPGuino on my motorbike (a 125 v twin) but am struggling to get the calibration correct. The issue is that its very difficult to fill the tank exactly the same on more than one occasion due to the tank design. Is there any other way to calibrate the mpguino. I am strugling to find flow rate information for the injectors in my bike. I have narrowed down the vss pulses but the injector pulse value is baffling me. Thanks in advance!