Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - LCD Instrumentation for Cougar Controller

Brose · 07-22-2011, 08:05 PM

I hope that someone can help me with the firmware for the LCD Instrumentation. I have built the project but am a little short on knowledge when it comes to setting up and burning the firmware. I actually bought a k128 USB Pic programmer but really haven't quite got the hang of setting up the project. I probably have just enough knowledge to be dangerous. Well to cut this as short as possible what I need to know it what files will make up the project that will be burned onto my 18F2480 PIC?
I have read everything I can find but am still somewhat in the dark. I would really appreciate any help you can render to my cause. Maybe there is someone out there who has the time to give a hand, anyway thanks in advance.

Bill Rose

479-883-5279

07-22-2011, 08:05 PM	#358 (permalink)
Brose ManofGod Join Date: Mar 2011 Location: Arkansas Posts: 15 Thanks: 10 Thanked 0 Times in 0 Posts	LCD Instrumentation Firmware HELP!!! I hope that someone can help me with the firmware for the LCD Instrumentation. I have built the project but am a little short on knowledge when it comes to setting up and burning the firmware. I actually bought a k128 USB Pic programmer but really haven't quite got the hang of setting up the project. I probably have just enough knowledge to be dangerous. Well to cut this as short as possible what I need to know it what files will make up the project that will be burned onto my 18F2480 PIC? I have read everything I can find but am still somewhat in the dark. I would really appreciate any help you can render to my cause. Maybe there is someone out there who has the time to give a hand, anyway thanks in advance. Bill Rose 479-883-5279