Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

winker · 09-08-2011, 01:41 PM

I have today finished building my own MPGuino based on the these schematics

/trunk/mpguino/ - opengauge - Open Source Fuel Efficiency Instrumentation - Google Project Hosting (the 13 version)

I plugged it in and got no injector pulses though the VSS was working. After quite a bit of checking I realised that I had been here before. I needed to replace the 50K input resistor on the injector with a 1k. See my previous post

http://ecomodder.com/forum/showthrea...ers-11291.html

That sorted things, and is what I had on my test rig cobled together when I first tried to get this working. Im now going to switch the 50K VSS for a 1K (perhaps 1.2K what the hell).

09-08-2011, 01:41 PM	#5 (permalink)
winker EcoModding Lurker Join Date: Nov 2009 Location: UK Posts: 18 Thanks: 0 Thanked 2 Times in 2 Posts	I have today finished building my own MPGuino based on the these schematics /trunk/mpguino/ - opengauge - Open Source Fuel Efficiency Instrumentation - Google Project Hosting (the 13 version) I plugged it in and got no injector pulses though the VSS was working. After quite a bit of checking I realised that I had been here before. I needed to replace the 50K input resistor on the injector with a 1k. See my previous post http://ecomodder.com/forum/showthrea...ers-11291.html That sorted things, and is what I had on my test rig cobled together when I first tried to get this working. Im now going to switch the 50K VSS for a 1K (perhaps 1.2K what the hell).