Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

harlequin2 · 09-23-2011, 07:41 PM

Yes, I will have some spare pcbs for both the cell modules and the control unit. Bare pcbs will cost you $2 for the cell modules and $10 for the control unit, plus postage - via UPS or somesuch, probably about $30.
I admire anyone who attempts to re-do it for the Arduino!

Here's a picture of the cell modules installed in one of my car's battery boxes:

09-23-2011, 07:41 PM	#46 (permalink)
harlequin2 EcoModder Join Date: Mar 2010 Location: New Zealand Posts: 181 Thanks: 0 Thanked 33 Times in 20 Posts	Yes, I will have some spare pcbs for both the cell modules and the control unit. Bare pcbs will cost you $2 for the cell modules and $10 for the control unit, plus postage - via UPS or somesuch, probably about $30. I admire anyone who attempts to re-do it for the Arduino! Here's a picture of the cell modules installed in one of my car's battery boxes: Attached Thumbnails __________________ Sometimes I sits and thinks and sometimes I just sits. Last edited by harlequin2; 10-07-2011 at 07:14 PM..