|
Okay, so I lost my patience with the cardboard in less than half an hour! So I just used some handy-dandy 100 MPH tape, that's green duct tape to those not in the military. So the entire grill is covered and the only opening that is left is the one in the bumper. I noticed that there are two horizontal depressions, one above the Ford decal and the other below, that correspond with a head light to head light gap in the grill. The gaps to the left and the right of the decal are not noticeable so I will find a way to support the top and bottom gaps, I still have plenty of cardboard, for phase 2 of the project.
Any advice?
|