|
So my bed is 54.5" wide and 72" long. I want to do a 1/3 cover and a 2/3 cover. I also want these covers capable of switching places and staying in place without the other, just in case I'm hauling something around. So that's a 54.5" by 24" panel and a 54.5" by 48" panel. Now polystyrene comes in 48" by 96" panels, which irks me because square area I should have enough to make my cover. So my 2/3 panel will be solid and the 1/3 panel will be made up of two 24" by 27.25" panels, leaving me with a 48" by 14.25" panel left over, anybody have any ideas of what to do with this?
Does anybody have any experience with attaching polycarbonate to polystyrene?
|