Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - DIY Grid-Tie INVERTER??

Tijeff · 10-12-2011, 02:25 PM

Here is a typical triac
http://www.littelfuse.com/data/en/Da...x_Qxx16xHx.pdf

Look at
Figure 9: On-State Current vs. On-State Voltage (Typical)

You will loose 1.1v at 10Amp

1.1v x 10 amp = 11w of heat to dissipate

10-12-2011, 02:25 PM	#19 (permalink)
Tijeff EcoModding Lurker Join Date: Feb 2008 Location: Montreal Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Here is a typical triac http://www.littelfuse.com/data/en/Da...x_Qxx16xHx.pdf Look at Figure 9: On-State Current vs. On-State Voltage (Typical) You will loose 1.1v at 10Amp 1.1v x 10 amp = 11w of heat to dissipate __________________ Perfect is the enemy of better