Quote:
Originally Posted by Weisheimer
Nice work Adam!
Which isolated DC-DC(s) are you short?
I have a spare for a P&S controller for certain. Would that work?
Mark
|
Hey Mark,
That dc-dc is of the same series, but is the wrong output.
The new board uses 2 dc-dc converters for full 3kv isolation. One of the converters is for 5V output and the other is 15V output for driving the igbt's. I designed the output section to use both 12v and 15v output modules so that you can use the 15v one for powering the vla500's and you can use the 12v output one to power a modfet driver board.
Here is a link to the 2 dc-dc converts:
15V:
EC4A03H Cincon DC/DC Converters & Regulators
5V:
EC4A01H Cincon DC/DC Converters & Regulators
-Adam