|
Great ! Congratulation, because it's really not an easy job !
Nothing to do with this topic, but is there a place on this forum to talk about a generic BMS I designed and I want start to sell in some weeks ? Based on a single small board on each element, 1 wire bus between element, automatic addressing, voltage and temperature measurement ( precision <0.5% on voltage), very easy wiring with screw terminals, very low size (24x20mm), low price, and most likely open protocol to read element data and integrate the BMS easily on any system with an available RS232 port (good for DIY guy !!).
Regards
Cyril
|