Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

yostumpy · 03-15-2012, 03:55 PM

thought i'd do something about this huge gap twixt bumper and bodywork.

took some plastic electrical conduit, used when plastering over cables, and taped it nt to position, using a sharp knife to cut round the contours of the front panel.then

.

used a peice of flat alluminium, and pop riveted it down to the bumper, thus squeezing the plastic conduit to shape. Don't know if it'll make the slightest bit of difference, but I feel good.

and the result?

03-15-2012, 03:55 PM	#3 (permalink)
yostumpy EcoModding Lurker Join Date: Feb 2012 Location: gravesend, uk Posts: 47 wallace - '98 landrover 300tdi defender 110 hard top 90 day: 24.56 mpg (US) Thanks: 1 Thanked 1 Time in 1 Post	thought i'd do something about this huge gap twixt bumper and bodywork. took some plastic electrical conduit, used when plastering over cables, and taped it nt to position, using a sharp knife to cut round the contours of the front panel.then . used a peice of flat alluminium, and pop riveted it down to the bumper, thus squeezing the plastic conduit to shape. Don't know if it'll make the slightest bit of difference, but I feel good. and the result? __________________