Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - 1992 Civic VX

Crazy88 · 03-17-2012, 02:08 PM

I have a '92 VX. It runs fine, but given that it is 20 years old, I decided to pull off the intake and do some cleaning.

I'd like to clean the EGR ports, but I've never done it on one of these cars. It apparently has some welds that need to be drilled out. Has anyone done a write-up on this? I'd like to find some very clear instructions before I start drilling holes in my intake.

03-17-2012, 02:08 PM	#1 (permalink)
Crazy88 EcoModding Lurker Join Date: Mar 2012 Location: Arizona Posts: 15 Thanks: 0 Thanked 2 Times in 2 Posts	1992 Civic VX - Cleaning EGR ports I have a '92 VX. It runs fine, but given that it is 20 years old, I decided to pull off the intake and do some cleaning. I'd like to clean the EGR ports, but I've never done it on one of these cars. It apparently has some welds that need to be drilled out. Has anyone done a write-up on this? I'd like to find some very clear instructions before I start drilling holes in my intake.