Quote:
Originally Posted by MPaulHolmes
I've got a sample 400v diode but it only has one really wide leg and I don't know how to put slots in the board. I wouldn't mind figuring that out. That would let me up the voltage some, since good mosfets can be had up to 300v.
edit: forgot bus bars- 1" x 0.25" x 14" I think bus bars. Not sure about length at the moment. 13" or 14". and B- is 3/4" x 3/8" x LENGTH, where length is "I forgot" haha
|
Thanks
the 300v sounds good I'm wanting to stay below 300v but was thinking around 220 - 240 would be good and that would have room to upgrade if needed
How many diodes would it take?