Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

MPaulHolmes · 04-20-2012, 03:08 PM

Oh crap!! Not good. I had used the clare ixdi604pi last time, and it could go up to 35v, so I assumed it was the same for the mic4451. Thank you for helping me to avert a disaster! Fortunately, it's a standard pinout, so I just need to find a clare 35v driver. I just found one, but it was out of stock at digikey. I'll go back to searching. YOu saved my bacon!!!

OK, the IXDI614PI will do very nicely. It can go up to 40v. It's out of stock, but I have written to Clare, and a couple other places, and should hear back soon. You saved me!!! Thank you for preventing disaster!

04-20-2012, 03:08 PM	#711 (permalink)
MPaulHolmes PaulH Join Date: Feb 2008 Location: Maricopa, AZ (sort of. Actually outside of town) Posts: 3,832 Michael's Electric Beetle - '71 Volkswagen Superbeetle 500000 Thanks: 1,362 Thanked 1,202 Times in 765 Posts	Oh crap!! Not good. I had used the clare ixdi604pi last time, and it could go up to 35v, so I assumed it was the same for the mic4451. Thank you for helping me to avert a disaster! Fortunately, it's a standard pinout, so I just need to find a clare 35v driver. I just found one, but it was out of stock at digikey. I'll go back to searching. YOu saved my bacon!!! OK, the IXDI614PI will do very nicely. It can go up to 40v. It's out of stock, but I have written to Clare, and a couple other places, and should hear back soon. You saved me!!! Thank you for preventing disaster! __________________ kits and boards Last edited by MPaulHolmes; 04-20-2012 at 03:33 PM..