View Single Post
Old 04-21-2012, 08:49 PM   #5687 (permalink)
pamcmills
EcoModding Lurker
 
Join Date: Sep 2010
Location: arizona
Posts: 5
Thanks: 0
Thanked 8 Times in 3 Posts
I just have to say thanks to Paul also. And thanks to his wife Sabrina for her support in his efforts. My S-10 project would still dead in the water if not for the effort Paul has put into this open source project. Thanks Paul for the boards and parts you have provided at such a reasonable cost. I have 10000 miles on electric power now. 300 miles at 192 volts before the mosfets gave up. I did up the voltage to 168 volts about 2000 miles ago. So far so good. This morning I pulled out the transmission and adapter to start my conversion to an automatic transmission. It'll be a few weeks before it is done. Could use some suggestions on an idle function for the controller. Thanks.
  Reply With Quote
The Following 2 Users Say Thank You to pamcmills For This Useful Post:
MPaulHolmes (04-21-2012), Nevyn (04-23-2012)