Hi
I just want to share with you this DIY(Do it yourself) method to install and tune a car for magnets that results in increase of MPG and decrease of GPH(gallons per hour) for less fuel consumption of about 14%.
As you can see in these 2 vidoes:
1. metacafe com/w/8371971]Scangauge Proof 14 Percent Less Gasoline with Inline Magnets - Video
2. vodpod com/watch/16372425-scangauge-proof-14-percent-less-gasoline-with-inline-magnets?u=pathw9m7sp&c=pathw9m7sp]Scangauge proof 14 percent less gasoline with inline magnets Video
As you can see in the above videos, the Scanguage II Test meter shows the GPH without magnets installed as 0.17 and after installation and 20 minutes test drive it decreases to 0.15 i.e. a 25% decrease or 14.7% decrease in fuel consumption. So you can do it yourself to get low fuel consumption by simply installing the magnets in fuel line of your car/truck etc.