This is what Ive gathered so far.. Please let me know what you guys think on the 02 wiring.
Ive got a stock VX wiring harness that the sensor plugs into but according to Chiltons and Helms my stock sensor or wiring harness is wrong..
I have the NGT sensor with the following wires:
Red
White
Yellow
Black
Orange
I am gonna wire them accordingly:
Yellow: Heater Ground (-) to pin D3 ? (Not so sure about that one.. but its all thats left from the diagram)
Orange: Heater Power (+) to Pin A6
Black: Common Ground ( for IP and Vs ) to Pin D16
White: IP circuit (Current pumping) (+) to Pin D14
Red: Vs reference (+) to Pin D8
|