Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

apowers · 07-11-2012, 07:58 PM

electricstorm

I used a 230 watt soldering gun. It worked fine. I would pull the trigger and let the tip get red before I soldered. That way I was only on the fet and copper just a few seconds.

Alvin

07-11-2012, 07:58 PM	#5792 (permalink)
apowers EcoModding Apprentice Join Date: Aug 2009 Location: Tn Posts: 126 Thanks: 14 Thanked 19 Times in 16 Posts	electricstorm I used a 230 watt soldering gun. It worked fine. I would pull the trigger and let the tip get red before I soldered. That way I was only on the fet and copper just a few seconds. Alvin