There's is a photo of the boat tail undergoing tuft testing at the Aerodynamic Streamlining Template Part-C thread,page 4,#39 (permalink).
I'll get some additional shots when I can look up.
----------------------------------------------------------------------------
*Also,I got the tail's diffuser skinned with aluminum sheet today,replacing the disintegrated luan mahagony door skin original.
*Also rinsed,dried,and primed the three T-100 forward belly pan sections that I degreased last night.I'll pick up paint tonight.
*Also,I've roughed in 4-add-on leading-edge sections for the front of the aero shell.I had some cedar and redwood and I bandsawed, belt-sanded to fit the shell perimeter,then ran them through a quarter-round bit on the router table for a uniform radius.I'll pull them,coat with polyester resin,re-attach,then Bondo and blend in.
It's crunch time!
