Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Scangauage II constantly reading higher MPG?

Xhifer · 07-23-2012, 10:51 PM

Hi, I have been using the Scangauge II on my 2000 Chevrolet Camaro Z28.

I set everything up correctly. (ie. 5.7 Liter engine / 16 Gallon gas tank)

Last fill up I did about 200 Miles and filled up. The scangauge says I'm getting 28 MPG with about 80% freeway. but when I filled up at the same pump it was 23 MPG...

I did a 320 Mile trip today and it showed that I was getting an average of 31MPG but when I filled up at the same exact pump it calculated to 26.5MPG.

I am not hypermiling or anything, I'm just driving normal and a few WOTs

Is Scangauge always a little off? How do I calibrate it to be spot on or at least near.

Thanks

07-23-2012, 10:51 PM	#1 (permalink)
Xhifer EcoModding Lurker Join Date: Nov 2011 Location: San Francisco Posts: 16 Yari - '07 Toyota Yaris 90 day: 32.87 mpg (US) MeanAzz28 - '00 Chevrolet Camaro Z28 90 day: 23.04 mpg (US) Thanks: 8 Thanked 0 Times in 0 Posts	Scangauage II constantly reading higher MPG? Hi, I have been using the Scangauge II on my 2000 Chevrolet Camaro Z28. I set everything up correctly. (ie. 5.7 Liter engine / 16 Gallon gas tank) Last fill up I did about 200 Miles and filled up. The scangauge says I'm getting 28 MPG with about 80% freeway. but when I filled up at the same pump it was 23 MPG... I did a 320 Mile trip today and it showed that I was getting an average of 31MPG but when I filled up at the same exact pump it calculated to 26.5MPG. I am not hypermiling or anything, I'm just driving normal and a few WOTs Is Scangauge always a little off? How do I calibrate it to be spot on or at least near. Thanks