View Single Post
Old 07-24-2012, 05:28 PM   #412 (permalink)
ericbecky
EcoModding Seeker
 
ericbecky's Avatar
 
Join Date: Mar 2008
Location: Madison, WI
Posts: 106

red - '02 Honda Insight
Thanks: 0
Thanked 7 Times in 7 Posts
Quote:
Originally Posted by Freyguy View Post
OK guys, version 1.4 is ready for release.

Along with this I also revised the PCB and schematic to replace R9 with potentiometer VR3. This allows fine tuning of the pack voltage in hardware (as Jackbauer did). BOM is updated to include this pot. Itís a smaller 12 turn 6mm size (only way it would fit!)
I already sent the gerber files to Ianbartie so anyone ordering from him will get this latest change.
-Chris
I am looking at the files on the wiki and the Preliminary PCB artwork rev 1 is out there, but I'm not clear if it is updated to reflect the PCB changes listed above?

I am interested in buying a board if anyone has one available.
__________________
Eric Powers
Your Hybrid Battery Hero
EV Powers Hybrid Battery Service and Repair
Madison, Wisconsin
www.evpowers.com
  Reply With Quote