View Single Post
Old 08-12-2012, 01:59 AM   #29 (permalink)
ericbecky
EcoModding Seeker
 
ericbecky's Avatar
 
Join Date: Mar 2008
Location: Madison, WI
Posts: 106

red - '02 Honda Insight
Thanks: 0
Thanked 7 Times in 7 Posts
Tim,
In place of the $27 SSR in your diagram, I made a snubber circuit using three components. Total cost $6.83.

* Triac S216S02F Sharp Microelectronics | 425-2414-ND | DigiKey S216S02F $6.26
* 47 ohm resistor ULW3-47RJA1 TT Electronics/Welwyn | 985-1009-1-ND | DigiKey ULW3-47RJA1 $0.28
* 0.22F capacitor B32922C3224M189 EPCOS Inc | 495-4200-2-ND | DigiKey B32922C3224M189 $0.29

And here is a link to my crude drawing of the snubber circuit. http://bit.ly/MO0qXb
__________________
Eric Powers
Your Hybrid Battery Hero
EV Powers Hybrid Battery Service and Repair
Madison, Wisconsin
www.evpowers.com

Last edited by ericbecky; 08-12-2012 at 02:27 AM..
  Reply With Quote
The Following User Says Thank You to ericbecky For This Useful Post:
Daox (08-12-2012)