[seeodywhy]

No because there are more sensors on an obd2 motor. It would be easier to buy a conversion harness and then run the couple wires to run an obd2 motor with the vx ecu. The p2j doesn't use a 5 wire sensor. It would work just because the signal wire attaches to the same ecu pin for both cars. There is a d13b on ebay right now. It's in montreal I think. I drove there to get a motor I bought off ebay for a 300zx tt I used to have. The problem is that the guys who sell them don't know anything about them. I would have gone that route but a y5 engine tranny and all accessories dropped into my lap for 400. There is a guy in Indiana who gets them sometimes too.