Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - How to wire a 3 wire PB-6 with miro switch ?

DavidP · 11-02-2012, 04:45 PM

I bought a PB-6 3 wire throttle with micro switch on ebay to use with a Curtis 1204 controller ...

The Curtis 1204 manual is pretty clear ... using the black and white wire as throttle imputs 2 & 3, with 1 going to the key switch(KSI), the green is not used ...

This one has 3 wires ... Black / Blue / Tan (kind of pink/brown) to confuse things for a newbie ...

I'm kind of confused on what to do now ...

I was expecting a common colour code (Black/White/Green) to go with the Curtis controller ... or some information with the packaging or from the supplier ...

I don't know how to wire this PB-6 for my controller ...

11-02-2012, 04:45 PM	#1 (permalink)
DavidP EcoModding Lurker Join Date: May 2010 Location: Toronto Posts: 8 Thanks: 1 Thanked 0 Times in 0 Posts	How to wire a 3 wire PB-6 with miro switch ? I bought a PB-6 3 wire throttle with micro switch on ebay to use with a Curtis 1204 controller ... The Curtis 1204 manual is pretty clear ... using the black and white wire as throttle imputs 2 & 3, with 1 going to the key switch(KSI), the green is not used ... This one has 3 wires ... Black / Blue / Tan (kind of pink/brown) to confuse things for a newbie ... I'm kind of confused on what to do now ... I was expecting a common colour code (Black/White/Green) to go with the Curtis controller ... or some information with the packaging or from the supplier ... I don't know how to wire this PB-6 for my controller ... Last edited by DavidP; 11-02-2012 at 05:01 PM..