|
I'll post some pictures when I next get a chance, but the body is back on the frame.
I still don't have the bracing tubes in.
I sprayed a couple of layers of Krylon white underneith.
Seats and the lap portion of the harness in.
Unfortunetly I broke the gas tank while trying to get it ready for an event last weekend (so I didn't get to go). Went to bleed the brakes at 11pm friday night, and layed in a puddle of gas.
We have started building a new 12 gallon 3/16 steel gas tank and the bottom is going to be 3/8 with internal ribs.
It will be a little heavier than the stock 16 gallon but hang down only half as far. The rear axle hangs down lower than the new tank instead of the tank.
|