Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

Sompom · 01-02-2013, 01:16 PM

Hi all,
I'm working on building a SEPEX controller based on the Open ReVolt. With a little thinking, I'm controlling a tiny motor on the bench (hooray!). What I need to do now is build two new MOSFET control boards, I would like to just copy them from the schematic but I have talked to Paul and, unfortunately, he says the source files are missing...
Does anyone have the schematic source files they can give me? I'm using the 2C board, but I'm sure I could figure it out from a different revision.
Thanks!

01-02-2013, 01:16 PM	#5935 (permalink)
Sompom EcoModding Lurker Join Date: Jan 2013 Location: United States Posts: 3 Thanks: 1 Thanked 1 Time in 1 Post	Schematic Hi all, I'm working on building a SEPEX controller based on the Open ReVolt. With a little thinking, I'm controlling a tiny motor on the bench (hooray!). What I need to do now is build two new MOSFET control boards, I would like to just copy them from the schematic but I have talked to Paul and, unfortunately, he says the source files are missing... Does anyone have the schematic source files they can give me? I'm using the 2C board, but I'm sure I could figure it out from a different revision. Thanks! Last edited by Sompom; 01-02-2013 at 02:02 PM..