|
Finally installed a heater core in the intake box of the Karen-Mobile.
It's a 1989-1992 Ford Probe heater core (Murray P/N 398008), and between the intake box and the core, there's about an inch of clearance on the length of the core, and about 1/2 an inch of clearance on the core width. Doubtless there are heater cores that would have a better fit, but their inlet and outlet nipples are rather awkwardly placed, compared to the Ford Probe core.
Tomorrow, I hook the core up to the Karen-mobile's heater plumbing, and see what happens.
|