Its the stock p06 for a 95 dx auto, vtec enabled, and socketed with a demon rtp. I was curious how lean lean burn is, I thought I read 18:1. I do have the dimmer wire hooked up, and it hardly make a difference
I might have to tint my gauge. I thought in the programmed settings I might be able to change it but not that I've found yet. I do have my green led's setup for 9(let's hope I never see it, though with stock map for d15b7 running a d16a6 I saw 11.6 at one point(WOT)) and going yellow at 14.7 and red at 19 and stopped the sweep and numerical display at 28 because these are port injected cars, we can't controll very well a anything leaner, but I've seen direct injection in the 40's ��