|
January 10, 2013
I'm VERY behind in posting updates. Updates were posted to the WIKISPEED team group, so I will use them to 'backfill' posts. When I'm caught up, I'll try to post details in this build log that are too detailed for the WIKISPEED group.
The High Voltage Junction Box (the Power Junction Box did not stick as a name) and Low Voltage Junction Box (again, Signal Junction Box did not stick as a name) are not split into two boxes as yet. They are in different sections, but they still share a single backplate. That's the first picture
There is a sketch of the wiring diagram and schematic of the combined electric Junction Box. This is the second picture
The first revision (untested - written after testing) set of instructions for interfacing to the electric Junction Box is attached. There are 'future' portions of the HVJB and LVJB described.
|