View Single Post
Old 03-17-2013, 07:12 PM   #1 (permalink)
dom444
EcoModding Lurker
 
Join Date: Mar 2013
Location: australia
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Mpguino software for older cars with carb

I am new here and have built the Mpguino very nice circuit, but I have an older car with a carb has anyone moded the software to run on a flow sensor pulses and maybe ignition pickup circuit for rpm I have orderd a flow sensor on ebay that they use for the new coffe machines





http://img268.imageshack.us/img268/2463/597604178o.jpg

I need to test if the plastic withstands petrol but at only $8 to buy can't go wrong
they come in 3mm and 2mm bore sizes and would do the job well as they measure the amount of liquid to fill a cup
I think this would make the unit universal and could be used on any car


Last edited by dom444; 03-18-2013 at 06:33 PM..
  Reply With Quote