|
I don't think there will be any issues with overheating as long as the radiators are specced accordingly, some maths are required here..
I cannot fit a CAI with the radiator in its current position, its a large standard radiator that takes up all the available opening into the engine compartment.
I have to either remake the front radiator to allow a gap on one side to allow a 3" pipe to pass infront of it, or run radiators in the rear, both are going to require some design and fabrication time, though for a little extra effort I could run a rad at the back, hence my questions about whether the aero is worth the little extra effort.
|