Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - CarBEN EV5 Full Sized Prototype Construction

stankoprowski · 07-24-2013, 10:15 AM

Neil,

A question. You have decided that you don't need the structural properties of polyester/vinylester/epoxy. Have you considered alternate cloths, like hemp, bamboo or whatever?

Stan

[QUOTE=Rokeby;381696]Neil,

I'm not convinced that your plans to use a wood glue/fiberglass laminate is a good idea. This from my history as a professional boat builder with experiences in composite construction from 65 ft fishing vessels to small skiffs, canoes and kayaks. It is widely held that boat builders are a conservative bunch. Well, I've been one of them, and perhaps as a result I'm over cautious. So be it. Here are my thoughts.

<snip>

07-24-2013, 10:15 AM	#460 (permalink)
stankoprowski EcoModding Lurker Join Date: Jul 2013 Location: Guadalajara, Mexico Posts: 13 Thanks: 4 Thanked 2 Times in 2 Posts	CarBEN EV5 Full Sized Prototype Construction - 5 Seat Electric Car From Scratch Neil, A question. You have decided that you don't need the structural properties of polyester/vinylester/epoxy. Have you considered alternate cloths, like hemp, bamboo or whatever? Stan [QUOTE=Rokeby;381696]Neil, I'm not convinced that your plans to use a wood glue/fiberglass laminate is a good idea. This from my history as a professional boat builder with experiences in composite construction from 65 ft fishing vessels to small skiffs, canoes and kayaks. It is widely held that boat builders are a conservative bunch. Well, I've been one of them, and perhaps as a result I'm over cautious. So be it. Here are my thoughts. <snip>