View Single Post
Old 08-18-2013, 10:47 PM   #6 (permalink)
Busy Homeowner
Join Date: Jan 2008
Location: In a Holler Next to a Cow Field, Virginia
Posts: 30
Thanks: 1
Thanked 8 Times in 6 Posts
Test drive results! I took the opportunity to test the first cover with the trimmed spacers. Vibration was improved but not eliminated. After a second trimming and another 10 mile test loop, I both hit my first 800 mile tank (idiot light came on around 806) and found that the vibration has been eliminated! The next two tasks are to cut the rest of the spacers and trim/deburr them, and then decide on what filler to use in them. While not strictly necessary, I want to fill them and drill out 1/4" holes to keep them coaxial with the screws during installation.
  Reply With Quote