Quote:
Originally Posted by t vago
Sorry about that. I could get the Parallax board to work without having to remove the internal resistances. It was a nice little challenge to figure out the equivalent resistances of the 2k2/4k7/10k/etc with the internal 10k resistances of the Parallax board - sort of a good 1st year college problem. And, it's a plus because now nobody has to hack into whatever it is they buy, be it the Parallax board or that board that you found, so nobody has to be nervous about potentially damaging it. |
I just asked prque have not decided if I use the three buttons or 5 Way / Direction Tactile Switch without board, because I intend to put the buttons next to the LCD and do not have much space. So I have to create a board, and was in doubt whether or not to include the internal resistances of 10k.
Quote:
|
Yes, that was intentional. Move the button up, and it causes the brightness to vary, or it causes the number being edited to move up one digit. It's kind of a start to what I think is your idea on how the user interface ought to be changed.
|
Ok
Thank you
José Rodrigues