|
EV Automatic Gearbox Controller Project
Thought I'd start a thread on a new project I have just begun. Plan is to develop an open source arduino based controller for automatics. The ZF 5HP24 is my first victim as I need it for a new conversion project but also plan on looking at the 5HP18 and the CAN bus controlled 6HP26.
First installment is a general intro and look at the flexplate coupler design :
__________________
Now, Cole, when you shift the gear and that little needle on the ammeter goes into the red and reads 2000 Amps, that's bad.
www.evbmw.com
|