RobertSmalls; I was not aware of the Insight in 2010. I am now a slave to the machine. This winter during a super cold spell I took a spare bumper, cut it in two lengthwise and vertically to construct a bumper 6 inches shorter and shallower. This was all done in the living room. I am 87 and live alone so I have that freedom. I then used the very friendly plastic, LEXAN to fasten the small bumper to the car, making a 16'' extension. Encouragement came from the short boattail on the GM impact race car. MetroMPG set up an address for the project since I am a newbie.
There are phase 1 photos. Great minds run in the same gutter.
http://ecomodder.com/forum/showthrea...are-28088.html