Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

user removed · 05-13-2014, 07:01 PM

If you still have the bent lower control arm and the front end was aligned with the bent lower control arm, then I would bet the tie roads are not the same length.

Rack must be centered AND tie rods must be the same length.

regards
Mech

05-13-2014, 07:01 PM	#17 (permalink)
user removed Master EcoModder Join Date: Sep 2009 Posts: 5,927 Thanks: 877 Thanked 2,024 Times in 1,304 Posts	If you still have the bent lower control arm and the front end was aligned with the bent lower control arm, then I would bet the tie roads are not the same length. Rack must be centered AND tie rods must be the same length. regards Mech