Quote:
Originally Posted by Astro
With the signal wire loaded with 4.7k to ground the current flowing in the signal circuit is 0.008mA at zero throttle and 0.844mA at full throttle.
i didn't have a 47k resistor handy to test the effect of increasing this value, actually i was using a 4.7k SMD resistor held by alligator clips as all my through hole components have all hidden themselves somewhere in the study. Obviously in fear of these new SMD interlopers.
|
Always there is a Radio Shack store with some spare parts on hand....and "if" the store clerk have an idea or knowledge of what U R looking for...
.