Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

alexander.foti · 08-20-2014, 03:59 AM

Hi all

I have tapped into the VSS signal from the clocks on my NC700.

I have my pulses per mile set to 120000. If I set my vss delay to 2ms it reads up to 10mph only.

1ms reads up to 38 mph only.

0ms reads up to 78mph, after that speed it starts going down until it reaches 0.

The bike has a VSS which is a hall effect sensor.

Any ideas? I would really hate to have to add a reed switch and magnet as its very messy on the bike

Thanks in advance!

08-20-2014, 03:59 AM	#1 (permalink)
alexander.foti EcoModding Lurker Join Date: Nov 2008 Location: London UK Posts: 95 Thanks: 3 Thanked 7 Times in 4 Posts	VSS limit Hi all I have tapped into the VSS signal from the clocks on my NC700. I have my pulses per mile set to 120000. If I set my vss delay to 2ms it reads up to 10mph only. 1ms reads up to 38 mph only. 0ms reads up to 78mph, after that speed it starts going down until it reaches 0. The bike has a VSS which is a hall effect sensor. Any ideas? I would really hate to have to add a reed switch and magnet as its very messy on the bike Thanks in advance!