Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Toyota OBD1 diagnostic port reader, poor man's scanguage

H-Man · 09-01-2014, 08:36 PM

No. The setup wasn't that complex anyway, just TE2 jumped to E1, E1 connected to the serial port pin 5, VF1 on serial port pin 6, and a capacitor (1.5nF-3nF) between VF1 and E1.

OBD-1 Serial Interface - Toyota Wiki

09-01-2014, 08:36 PM	#8 (permalink)
H-Man The brake pedal is evil Join Date: Jan 2013 Location: Arizona Posts: 401 Denny's Detector - '08 Mercury Grand Marquis Taserface - '17 Chevy Volt Thanks: 5 Thanked 57 Times in 52 Posts	No. The setup wasn't that complex anyway, just TE2 jumped to E1, E1 connected to the serial port pin 5, VF1 on serial port pin 6, and a capacitor (1.5nF-3nF) between VF1 and E1. OBD-1 Serial Interface - Toyota Wiki __________________ Getting sensor data off of a pre OBDII Toyota ECU via TDCL. All of this is on E10: Project E is my current focus.