I changed these today and might as well show them here.
screen 1 ~ main screen on all the time
[ MAP ] [ trip average mpg ]
[ short fuel trim ] [ instant mpg ]
[ intake temp ] [ battery voltage ]
[ coolant temperature ] [ trip miles ]
screen 2 ~ only by manual ~ all stats recorded at fill ups
[ miles overall ] [ o2 sensor bank 1 ]
[ gallons overall ] [ trip mph ]
[ average mpg overall ] [ trip time ]
[ average mph overall ] [ level gallons ]
I used to use % engine load but switched to MAP (manifold absolute pressure),
go to 90 MAP on pulses, and make sure to not exceed matching RPMs when shifting.
Last edited by j12piprius; 12-22-2014 at 01:39 AM..
|