|
Just wanted to give everyone an update on my WAI. Still pulling air through the radiator, but I modified the radiator shroud so that I have a 3.5" circular opening at the corner where the hot coolant enters the radiator. It was about half that size originally. I use a 4" dryer vent hose to route air to the air filter box. With the revised opening I now see, depending on right foot input, a 25-45* temperature rise. I'll have to look at some sort of adjustable mixer now, since it's been 55-60* this week, and from what I've read here 130* is about as high as one wants IAT. I'm considering using a PVC T-joint to route WAI in one side, cold RAM air in the other, and figure out some sort of flapper door to adjust. Thoughts?
__________________
|