View Single Post
Old 11-29-2014, 01:50 AM   #1 (permalink)
3dplane
EcoModding Apprentice
 
3dplane's Avatar
 
Join Date: May 2008
Location: Florida
Posts: 158

14 Mirage - '14 Mitsubishi Mirage DE
Mitsubishi
90 day: 68.74 mpg (US)
Thanks: 35
Thanked 107 Times in 38 Posts
Made a Kamm extension for Mirage.Should it work?

We are used to seeing the template so much that one glance can tell that it might came out a bit too aggressive in both planes.







I've been driving with it for a few days but it has been windy until today.

So I finally had a chance on my way home today to do a little tuft testing.

Low light conditins did not let me get a good picture so I will have to draw it on top of one of the images to explain.

In short: Sides looked ok with the yarn straight back but on top only the center one pointed straight back. The rest on top pointed inward toward an imaginary point about three feet behind the car at the center.

Kind of like this:



It just makes no sense to me if I got the twin vortex going on making the yarn pointing inward on the top then why is it not pointing up at the sides of my contraption?

Anyhow I appreciate your input on this!

__________________


Last edited by 3dplane; 12-01-2014 at 07:16 PM.. Reason: spelling
  Reply With Quote
The Following 3 Users Say Thank You to 3dplane For This Useful Post:
BamZipPow (12-01-2014), MetroMPG (12-03-2014), oldtamiyaphile (11-29-2014)