Quote:
Originally Posted by MPaulHolmes
That thar looks like a sine wave, e*clipse!!
I was thinking of adding a leakage current monitor circuit, with a known large resistance between pack ground and chassis. And if the resistance drops below a particular value, then it would flag an alarm.
|
Paul, would this circuit be able to measure how much leakage current was flowing or would it just be triggered above a certain current?
Reason i ask is because one of the tests that the authorities here require is a measurement of the leakage current between the pack and the chassis.
Would be handy to know what the value is. Would also be nice to know if it changes in the future.