A bunch of you have already bought some of these from me, but I figured I'd make an official thread so everyone knows and I can point people to a thread. I am making custom 3d printed shift knobs, and they are for sale. They have the EcoModder emblem on them as shown above. You can get them with with 1, 2 or 3 buttons. The switches are customizable. I have a few different switches depending on the application. I have momentary switches (NC and NO) and toggle switches (push once -> on, push again -> off). The knob comes prewired with about 12" of pigtail wire (no connectors).
The switches can be used for numerous things. The most popular is a kill switch. However, a start switch would be nice The Insight guys put their clutch switch and a regen button on the knob. Almost any function you'd like can be put on the knob with a switch.
Prices
1 button - $25 shipped
2 button - $30 shipped
3 button - $35 shipped
Please PM me if you're interested. We'll need to talk a little about your application before figuring out what switches to use. I also need to know the thread size for your shifter shaft for proper mounting.
If you have something else you'd like to do, customizing the knob or doing something else wacky feel free to PM me. We can probably figure something out.
Here are a few pictures from the development and installation of these knobs.
I am also open to doing other 3d printing if you have something you'd like made up. I've been sharing the things I've been making here:
http://ecomodder.com/forum/showthrea...ter-30670.html